FreeMax Rexa Pro Vape Kit 30W

The FreeMax Rexa Pro Vape Kit 30W is a compact refillable pod device designed around a built-in 1300mAh battery, adjustable 5W–30W output, touchscreen controls, adjustable airflow, and compatibility with the Rexa pod platform. The device combines a portable form factor with a range of adjustable settings, allowing users to configure power, airflow, and pod characteristics according to their preferred vaping style.

The Rexa Pro features a 2.51-inch HD touchscreen that provides access to device controls and settings. Its 1300mAh integrated battery can be recharged through a USB Type-C charging connection with support for up to 2A charging. Power output can be adjusted between 5W and 30W, while Power and Smart modes provide different approaches to device operation.

For users who prefer either a tighter MTL (Mouth To Lung) draw or a more open RDL (Restricted Direct Lung) experience, the side-mounted airflow slider allows the airflow level to be adjusted. The device also supports refillable pods with a capacity of up to 3ml and uses the Rexa pod platform with compatible coil technology.

Key Features of the FreeMax Rexa Pro 30W

Built-in 1300mAh rechargeable battery
Up to 2A USB Type-C charging
Adjustable 5W–30W power output
Power and Smart operating modes
2.51-inch HD touchscreen display
Refillable pods with up to 3ml capacity
Rexa pod platform compatibility
Duomax parallel mesh technology compatibility
Adjustable side airflow slider
Suitable for MTL and RDL draw configurations
Button and touchscreen controls
Multiple colour options

1300mAh Built-In Battery

The FreeMax Rexa Pro incorporates a 1300mAh built-in rechargeable battery. Because the battery is integrated into the device, there is no requirement for an external battery cell. This makes the device a self-contained pod kit and keeps battery management relatively straightforward.

The battery capacity is intended to provide portable operation while maintaining the compact characteristics expected from a pod-style device. Actual operating time varies according to wattage, coil resistance, airflow configuration, frequency of use, and other operating conditions.

Higher power settings generally require more battery energy than lower power settings. Users operating the device at 25W–30W may therefore experience different battery duration compared with someone using a lower wattage setting.

2A USB Type-C Fast Charging

The FreeMax Rexa Pro uses a USB Type-C charging connection and supports charging at up to 2A. Type-C connectivity provides a convenient and widely used charging interface for the integrated battery.

Charging behaviour can vary depending on the power source, cable, battery condition, and environmental factors. For safe operation, use an appropriate charging cable and compatible power source, and avoid using damaged cables or charging accessories.

During charging, the device should be placed on a stable, dry surface away from excessive heat, moisture, or other sources of damage. Users should also follow the manufacturer's charging recommendations supplied with the device.

5W–30W Adjustable Power Output

The Rexa Pro provides an adjustable power range of 5W to 30W. This allows the output to be matched more closely to the installed pod and coil configuration.

Lower wattage settings can be useful with higher-resistance coil configurations and tighter MTL-style vaping. Higher wattage settings can provide greater vapour production when used with a compatible lower-resistance coil designed for higher output.

The appropriate wattage should always remain within the recommended operating range of the installed coil. Using excessive power can cause overheating, unpleasant flavour, premature coil deterioration, or dry hits.

Power Mode and Smart Mode

The device provides both Power Mode and Smart Mode. Power Mode allows the user to manually configure the wattage within the device's available output range.

Smart Mode is designed to provide a more guided operating experience by helping manage the power level in relation to the installed pod or coil. This can be useful for users who prefer a simpler setup rather than manually adjusting the wattage every time a coil is installed.

The exact behaviour of Smart Mode may depend on the installed pod and coil. Users should check the manufacturer's instructions for the recommended settings associated with a particular Rexa coil.

2.51-Inch HD Touchscreen

One of the most distinctive features of the FreeMax Rexa Pro Vape Kit is its 2.51-inch HD touchscreen. The large display provides access to device information and control options without relying exclusively on traditional button navigation.

The touchscreen interface can be used to access different device functions. According to the operating information supplied for this device, users can swipe down to access the main menu and swipe up to access smart settings and media-related options.

A larger touchscreen can make information easier to view compared with a small conventional display. However, users should keep the screen clean and dry to maintain reliable touch operation.

Touchscreen and Button Controls

The Rexa Pro combines a physical button with touchscreen controls. This gives the device more than one method of interacting with its settings and firing functions.

For basic power control, the supplied operating instructions indicate that the main button can be pressed five times to turn the device on or off. This type of multi-click operation is commonly used to help prevent accidental activation when the device is stored or transported.

The button can also be used for additional controls. According to the supplied information, pressing the button three times enters wattage adjustment mode, while pressing it four times toggles the button activation function.

Basic Device Operations

Operation	Action
Power On/Off	Press the main button five times.
Wattage Adjustment	Press the main button three times to enter wattage mode.
Main Menu	Swipe down on the touchscreen.
Smart Settings	Swipe up on the touchscreen.
Button Activation Toggle	Press the main button four times.

Button combinations should be performed deliberately to avoid activating an unintended function. If the device behaves differently from these instructions, consult the manufacturer's current user documentation.

Up to 3ml Refillable Pod Capacity

The Rexa Pro uses refillable pods with a capacity of up to 3ml. A refillable pod allows the user to replenish e-liquid rather than replacing the entire pod whenever the e-liquid supply is depleted.

The actual usable capacity can depend on the specific pod version being used. Users should check the markings and specifications of the individual Rexa pod before filling it.

When filling a new pod, avoid getting e-liquid into the central airflow chimney. E-liquid should be added through the designated filling port according to the pod's design.

Rexa Pod Platform Compatibility

The FreeMax Rexa Pro is designed around the Rexa pod platform. Compatible pods and coils should be selected according to the manufacturer's specifications for the device.

The platform is intended to provide compatibility with different coil configurations, allowing the device to be used with different resistance levels and vaping styles. Before installing a coil or pod, confirm that it is specifically compatible with the Rexa Pro.

Duomax Parallel Mesh Technology

The compatible Rexa coil platform incorporates Duomax parallel mesh technology. Mesh coil construction uses a mesh heating element to distribute heat across a larger surface area than some traditional wire-style coil constructions.

Parallel mesh configurations are designed to provide consistent heating across the coil surface. Performance can vary depending on resistance, wattage, e-liquid composition, airflow, and the condition of the coil.

As with any replaceable coil, the coil should be replaced when there is a persistent burnt taste, noticeable deterioration in flavour, reduced vapour production, or other indications that the coil has reached the end of its usable life.

Coil Compatibility

The Rexa Pro is compatible with the Rexa pod and coil platform. The coil resistance should be selected according to the desired draw style and the manufacturer's recommended wattage range.

Coil Consideration	General Guidance
Higher Resistance	Generally suited to lower-power operation and a tighter MTL-style draw.
Lower Resistance	Generally suited to higher-power operation and a more open RDL-style draw.
Mesh Construction	Provides a broad heating surface for consistent coil heating.
Replacement	Replace the coil when flavour becomes burnt, muted, or noticeably degraded.

Always follow the recommended wattage range printed on the specific coil or provided by the manufacturer. The device's maximum 30W output does not mean every compatible coil should be operated at 30W.

0.6Ω and 0.8Ω Coil Options

Where compatible Rexa coil options include 0.6Ω and 0.8Ω configurations, the resistance difference can affect the preferred power level, airflow setting, vapour output, and overall draw characteristics.

A 0.6Ω coil generally falls into a lower-resistance category than a 0.8Ω coil and may be used for a somewhat more open RDL-oriented setup when operated within its specified wattage range.

A 0.8Ω coil generally provides a higher-resistance configuration that can be suitable for lower-power operation and a tighter draw. The exact recommended wattage should always be taken from the specifications of the individual coil.

E-Liquid Guidance

The appropriate e-liquid depends on the installed coil, airflow configuration, and preferred draw style. Higher-resistance MTL-oriented coils are commonly paired with e-liquid formulations intended for lower-power pod operation, while lower-resistance coils may be used with formulations suited to higher vapour production.

Users should check the manufacturer's recommendations for the specific Rexa pod and coil combination before selecting an e-liquid.

When using a new coil, allow sufficient time for the e-liquid to saturate the coil material before activating the device. Firing a dry or insufficiently saturated coil can result in a burnt taste and may damage the coil.

Adjustable Side Airflow

The FreeMax Rexa Pro 30W features a side-mounted adjustable airflow slider. Airflow adjustment changes the amount of air entering the pod and coil system during use.

A more restricted airflow can produce a tighter draw that may suit MTL vaping. Opening the airflow further allows more air to enter the system and can provide a more open draw suitable for RDL vaping.

Airflow Setting	General Draw Characteristics
More Restricted	Tighter draw, generally associated with MTL use.
Partially Open	Balanced airflow between tighter and more open configurations.
More Open	Looser draw, generally associated with RDL use.

Airflow preference is subjective, so users can make small adjustments until they find a comfortable configuration. Airflow should not be completely obstructed during operation.

MTL and RDL Vaping

The adjustable airflow system allows the Rexa Pro to accommodate both Mouth To Lung (MTL) and Restricted Direct Lung (RDL) styles, depending on the installed coil and airflow position.

MTL involves drawing vapour into the mouth before inhaling, producing a tighter and generally more restricted sensation. RDL involves drawing vapour more directly into the lungs while retaining some airflow restriction compared with a fully open direct-lung configuration.

The installed coil should always be appropriate for the intended vaping style. Users should not force a coil into an operating condition outside its recommended specifications.

FreeMax Rexa Pro Product Specifications

Specification	Details
Product Name	FreeMax Rexa Pro Vape Kit 30W
Device Type	Rechargeable refillable pod kit
Battery	1300mAh built-in rechargeable battery
Charging	USB Type-C
Charging Current	Up to 2A
Power Output	5W–30W
Operating Modes	Power Mode and Smart Mode
Display	2.51-inch HD touchscreen
Pod Capacity	Up to 3ml
Pod Platform	Rexa pod platform
Coil Technology	Duomax parallel mesh technology
Airflow	Adjustable side airflow slider
Draw Styles	MTL and RDL
Coil Options	Compatible Rexa coil options including 0.6Ω and 0.8Ω configurations where supported

Available Colours

The FreeMax Rexa Pro is available in several colour options. Colour availability may vary by market, production batch, and retailer inventory.

Colour	Description
Black	A sleek and classic finish suitable for users who prefer a simple, understated appearance.
Green	A vibrant colour option with a more distinctive and eye-catching appearance.
Gunmetal	A modern metallic-style finish offering a darker industrial appearance.
Gold	A brighter metallic-inspired finish with a more decorative appearance.
Pink	A brighter colour option with a distinctive and playful appearance.
White	A clean, minimalist colour option with a light overall appearance.

Colour Selection Guide

Colour does not affect the electrical specifications or operating characteristics of the device. The choice is primarily based on personal appearance preference.

Black provides a traditional understated look, while Gunmetal offers a darker metallic appearance. White provides a cleaner minimalist finish, while Green, Gold, and Pink offer more distinctive colour choices.

Performance and Vapour Production

The overall performance of the Rexa Pro depends on several factors, including the installed coil resistance, selected wattage, airflow position, e-liquid characteristics, battery charge level, and condition of the pod and coil.

The adjustable 5W–30W output provides flexibility across compatible coil configurations. Lower wattage settings generally provide a more restrained output, while higher settings can increase vapour production when paired with an appropriate coil.

The adjustable airflow further influences the draw. Restricting the airflow produces a tighter sensation, whereas opening the slider increases airflow and can create a more open RDL-oriented draw.

Touchscreen Information and Settings

The 2.51-inch HD touchscreen acts as the primary visual interface for the device. It allows users to interact with settings and view available device information.

According to the supplied operating instructions, swiping down opens the main menu, while swiping up provides access to smart settings and media options. Users should become familiar with the touchscreen controls before operating the device regularly.

Keeping the touchscreen free from e-liquid, condensation, and excessive moisture can help maintain responsive operation.

Pros & Cons

Pros	Cons
1300mAh built-in rechargeable battery	Battery cannot be replaced by the user
Up to 30W adjustable output	Higher wattage settings can increase battery consumption
2.51-inch HD touchscreen	Touchscreen requires additional care around moisture
USB Type-C charging	Charging performance depends on the power source and cable
Adjustable side airflow	Correct airflow depends on coil and personal preference
Supports refillable pods	Pods and coils require regular maintenance or replacement
Power and Smart modes	Multiple controls may require familiarisation
Multiple colour options	Colour availability can vary by market

How to Use the FreeMax Rexa Pro Vape Kit 30W

Using the FreeMax Rexa Pro Vape Kit 30W involves installing a compatible Rexa pod and coil, filling the pod with suitable e-liquid, allowing the coil to saturate, adjusting the airflow, selecting an appropriate power setting, and activating the device. Always make sure the pod and coil are correctly installed before operating the device.

Step 1: Check the Device Before Use

Before using the Rexa Pro for the first time, inspect the device, pod, coil, charging connection, and other components for visible damage. Do not operate the device if the battery housing, pod, charging port, or other important components appear damaged.

Make sure the USB Type-C charging connection is clean and dry. The device should be handled with dry hands, particularly when connecting or disconnecting the charging cable.

Step 2: Charge the Built-In Battery

If the device has a low battery level, connect a suitable USB Type-C cable to the charging port. The Rexa Pro features a 1300mAh built-in battery and supports charging at up to 2A under suitable conditions.

Place the device on a stable surface while charging. Avoid charging it near excessive heat, direct sunlight, water, or other sources of damage. Once charging is complete, disconnect the cable rather than leaving the device connected unnecessarily.

Step 3: Prepare the Pod

Before filling the pod, make sure the correct compatible Rexa coil is installed. If the pod uses a separate replaceable coil, install the coil securely according to the pod's design.

Check that the coil is properly seated before adding e-liquid. A loose coil can contribute to leakage or inconsistent performance.

Step 4: Fill the Pod

Locate the designated filling port on the compatible Rexa pod. Open the filling mechanism and carefully add the appropriate e-liquid without overfilling.

Keep e-liquid away from the central airflow chimney. Filling beyond the indicated capacity can increase the possibility of leakage.

The supplied specifications indicate that compatible pods can provide a capacity of up to 3ml. Always use the actual fill markings on the specific pod as the primary reference.

Step 5: Prime a New Coil

When installing a new coil, allow the e-liquid to fully saturate the coil before use. This process is commonly referred to as priming the coil.

After filling a new pod, allow sufficient time for the e-liquid to reach the coil material. The exact waiting period can vary depending on the coil construction and e-liquid viscosity.

Do not immediately operate a newly installed dry coil at high wattage. Insufficient saturation can cause a burnt taste and may shorten coil life.

Step 6: Install the Pod

Once the pod has been filled and the coil has been saturated, insert the pod into the Rexa Pro according to the pod's intended orientation. Make sure it is seated securely before using the device.

If the pod does not sit correctly, remove it and check for e-liquid residue, debris, or an incorrectly installed coil. Never force the pod into position.

Step 7: Turn the Device On

According to the supplied operating instructions, press the main button five times to turn the device on or off.

Use the five-click power function when the device is being stored or transported to help prevent accidental activation. The device should be switched off when it is not being used for an extended period.

Step 8: Select the Operating Mode

The Rexa Pro supports Power Mode and Smart Mode. Power Mode allows the user to configure the wattage manually within the device's available output range.

Smart Mode provides a more guided operating experience and can help simplify power selection when using compatible coils.

Always check the recommended wattage range of the installed coil before selecting a power level.

Step 9: Adjust the Wattage

The supplied controls indicate that pressing the main button three times enters wattage adjustment mode. Once in the appropriate mode, use the device controls to select the desired output.

The Rexa Pro provides a 5W–30W output range. Start at the lower portion of the coil's recommended wattage range and make gradual adjustments rather than immediately selecting the maximum output.

Step 10: Adjust the Airflow

The side-mounted airflow slider can be moved to adjust the amount of air entering the pod.

For a tighter MTL-style draw, move the airflow towards a more restricted position. For a more open RDL-style draw, move the slider towards the open position.

Airflow and wattage work together, so changes to one setting can affect the overall draw and vapour characteristics.

Step 11: Activate the Device

Once the pod is correctly installed, the coil is saturated, and the power setting is appropriate, the device can be activated using its firing control where supported by the selected operating configuration.

Take controlled draws rather than excessively long or repeated activations. If the device becomes unusually hot, produces an unexpected taste, or behaves abnormally, stop using it and investigate the cause.

Button Activation Toggle

The supplied operating information states that pressing the main button four times toggles the button activation function. This can be useful when users prefer to prevent or enable button-based activation depending on the device configuration.

Because button functions can vary between firmware versions, refer to the manufacturer's current instructions if the four-click command behaves differently.

Changing a Rexa Coil

Replaceable coils are consumable components and eventually require replacement. A coil may need replacing when flavour becomes consistently burnt or muted, vapour production decreases, or the coil produces persistent performance issues despite being correctly saturated.

Before replacing a coil, turn the device off where appropriate and remove the pod. Empty or manage the remaining e-liquid according to the pod's design before removing the old coil.

Install the replacement coil securely, refill the pod, and allow the new coil to saturate before use.

When Should You Replace the Coil?

Persistent burnt or unpleasant flavour
Noticeably reduced vapour production
Flavour becomes consistently muted
Repeated dry-hit sensations despite adequate e-liquid
Visible coil deterioration
Performance remains poor after checking wattage and airflow

Coil lifespan varies according to wattage, usage frequency, e-liquid composition, airflow, and other operating conditions. There is no fixed replacement interval that applies to every user.

Pod Maintenance

Regular pod maintenance can help reduce the possibility of leakage and inconsistent performance. Inspect the pod periodically for e-liquid accumulation around its connection points.

If e-liquid reaches the pod connection area, disconnect the pod and clean the affected area with an appropriate dry material. Ensure the connection is dry before reinstalling the pod.

Do not immerse the electronic device in water or cleaning fluid.

Managing E-Liquid Levels

Keep an eye on the e-liquid level inside the pod. Operating a coil when there is insufficient e-liquid can cause the coil material to become dry and produce an unpleasant burnt taste.

Refill the pod before the e-liquid level becomes critically low. Avoid overfilling, as excess e-liquid can increase the possibility of leakage or flooding.

Battery and Charging Safety

The FreeMax Rexa Pro contains an integrated rechargeable battery. Unlike a device designed for removable batteries, the internal battery should not be removed or replaced by the user.

Use a suitable USB Type-C charging cable and compatible charging source. Do not use visibly damaged charging cables, connectors, or power adapters.

Do not charge the device on soft surfaces such as beds, sofas, or other areas where heat may accumulate. Keep the device away from water and excessive heat during charging.

Charging Precautions

Use a suitable USB Type-C charging cable.
Inspect the charging cable before use.
Keep the charging port dry.
Charge on a stable, non-flammable surface.
Do not use a damaged device.
Avoid exposing the device to extreme temperatures.
Disconnect the charging cable after charging is complete.
Do not attempt to disassemble the built-in battery.

Safety Information

The FreeMax Rexa Pro Vape Kit 30W should be operated only according to the manufacturer's instructions and applicable local regulations. Vape devices contain electronic components and rechargeable batteries that require appropriate handling.

Do not use the device if it shows signs of physical damage, unusual overheating, battery deformation, liquid intrusion into the electronics, or other abnormal behaviour.

Keep the device, pods, coils, e-liquid, charging accessories, and other components away from children and pets. E-liquid should be handled carefully and kept in its original secure container when not being used.

General Operating Safety

Do not use the device if it is damaged.
Do not expose the device to water or excessive moisture.
Do not attempt to modify or repair the internal battery.
Use only compatible Rexa pods and coils.
Operate coils within their specified wattage range.
Do not obstruct the airflow during operation.
Keep the charging connection clean and dry.
Stop using the device if it becomes unusually hot.
Keep the device away from children and pets.
Follow all applicable local laws and regulations.

Temperature and Environmental Considerations

Extreme temperatures can affect rechargeable battery performance and electronic components. Avoid leaving the Rexa Pro in direct sunlight, inside a hot vehicle, near heaters, or in freezing conditions for prolonged periods.

Allow the device to return to a normal operating temperature before charging or using it if it has been exposed to unusually high or low temperatures.

Storage Tips

Proper storage can help protect the device, battery, pod, and touchscreen. When the Rexa Pro is not being used, keep it in a cool, dry location away from direct sunlight and excessive heat.

Store the device away from direct sunlight.
Keep it away from excessive heat and moisture.
Keep the device out of reach of children and pets.
Switch the device off before extended storage.
Keep the charging port clean and dry.
Do not store the device with damaged pods or coils.
Inspect the pod for leakage before storing the device.
Avoid placing heavy objects on the device or touchscreen.

Long-Term Storage

If the device will not be used for an extended period, remove the pod where appropriate and clean away any visible e-liquid residue. Store the device in a dry location away from extreme temperatures.

Avoid storing a rechargeable battery device in environments where it may be exposed to excessive heat or moisture. Periodically inspect the device for visible damage before returning it to use.

Why Choose the FreeMax Rexa Pro Vape Kit 30W?

The FreeMax Rexa Pro Vape Kit 30W combines a built-in 1300mAh battery, adjustable 5W–30W output, USB Type-C charging, a large 2.51-inch HD touchscreen, refillable pods, adjustable airflow, and Rexa platform compatibility in one pod system.

The adjustable output gives users control over the power level, while Power and Smart modes provide different approaches to operation. The touchscreen provides a larger interface for navigating device functions, and the adjustable side airflow allows the draw to be changed between tighter and more open configurations.

The Rexa pod platform also provides compatibility with different coil configurations. Where supported, options such as 0.6Ω and 0.8Ω coils allow users to select a resistance appropriate to their preferred operating range.

For users looking for a rechargeable refillable pod device with touchscreen controls and adjustable output, the Rexa Pro offers a combination of electronic controls and pod-based functionality within its 30W power class.

What’s Included

The exact contents of a FreeMax Rexa Pro package can vary depending on the market, edition, and retailer. The supplied product information confirms the device and its compatible Rexa pod platform, but the complete package contents should be checked against the packaging before purchase or use.

FreeMax Rexa Pro Vape Kit device
Compatible Rexa pod, where included in the specific package
Compatible Rexa coil(s), where included
USB Type-C charging cable, where included
User documentation, where included

Always check the package contents against the manufacturer's official packaging for the specific version of the product.

Cleaning the FreeMax Rexa Pro

Regular external cleaning can help maintain the appearance and operation of the device. Before cleaning, turn the device off and disconnect any charging cable.

Use a dry, soft material to wipe the exterior. Pay particular attention to areas around the pod connection and charging port, but avoid allowing liquid or cleaning products to enter the electronic components.

The touchscreen should be kept free from e-liquid and moisture. Do not pour cleaning fluid directly onto the screen or device.

Troubleshooting Common Issues

If the device does not activate, first check whether the battery has sufficient charge and whether the device is switched on. The supplied operating instructions indicate that five button presses control the power function.

If the device activates but produces little or no vapour, check that the pod is properly installed, the coil is correctly seated, the pod contains sufficient e-liquid, and the wattage is suitable for the installed coil.

If a burnt taste occurs, stop using the device and check the e-liquid level and coil condition. A new coil may require additional saturation time before normal operation.

Screen or Touchscreen Troubleshooting

If the touchscreen does not respond normally, first ensure that the screen is clean and dry. Remove any e-liquid, condensation, or moisture from the screen using a suitable dry material.

If the device remains unresponsive, check the battery level and restart the device using the normal power procedure. Persistent electronic problems should be referred to the manufacturer or an appropriately qualified service provider rather than attempting an internal repair.

Charging Troubleshooting

If the device does not appear to charge, check the USB Type-C connection and ensure that the cable is properly inserted. Inspect the cable for visible damage and try a known-compatible charging source if appropriate.

Do not continue charging a device that becomes unusually hot, shows physical battery damage, or behaves abnormally during charging.

Leakage Troubleshooting

If e-liquid leaks from the pod, check that the coil and pod components are correctly installed and that the pod has not been overfilled. Inspect the pod for cracks or other visible damage.

Excessive condensation around the pod connection can also affect the appearance of leakage. Clean the connection area and ensure that the pod is seated correctly.

If leakage continues after checking the pod and coil, replace the damaged or worn component where appropriate.

Flavour and Coil Performance

Coil performance can change over time. New coils generally require adequate saturation before operation, while older coils can gradually accumulate residue from e-liquid ingredients.

High power settings, frequent use, and certain e-liquid formulations can affect coil lifespan. Keeping the coil within its recommended wattage range and maintaining an adequate e-liquid level can help avoid unnecessary coil stress.

Airflow and Wattage Adjustment

Airflow and wattage should be considered together. Increasing power while maintaining a very restricted airflow can result in a warmer and potentially less comfortable draw. Opening the airflow can change the cooling and vapour characteristics of the coil.

Make adjustments gradually and remain within the recommended specifications of the installed coil.

Responsible Device Handling

The Rexa Pro should be handled as an electronic rechargeable device. Avoid dropping it, crushing it, exposing it to water, or storing it in environments that may damage the battery or electronics.

Do not attempt to modify the internal circuitry, battery, charging system, touchscreen, or other electronic components. Unauthorised modifications can create safety and performance risks.

Important Usage Note

The specifications and operating instructions in this description are based on the product information supplied for the FreeMax Rexa Pro Vape Kit 30W. Product specifications, firmware behaviour, included accessories, colour availability, and compatible coil configurations may vary by version or market.

Always refer to the manufacturer's documentation supplied with your particular device for the most current operating, charging, coil, and safety information.

Frequently Asked Questions

What is the battery capacity of the FreeMax Rexa Pro?

The FreeMax Rexa Pro features a built-in 1300mAh rechargeable battery.

What is the maximum power output of the Rexa Pro?

The device provides adjustable output from 5W to 30W, depending on the installed coil and operating mode.

Does the FreeMax Rexa Pro support USB Type-C charging?

Yes. The Rexa Pro uses USB Type-C charging and supports charging at up to 2A under suitable charging conditions.

What type of pods does the Rexa Pro use?

The device is designed around the FreeMax Rexa pod platform and supports compatible refillable pods.

What is the pod capacity?

Compatible Rexa pods can have a capacity of up to 3ml, depending on the specific pod version.

Does the Rexa Pro have adjustable airflow?

Yes. It features a side-mounted adjustable airflow slider that can be used to configure a tighter or more open draw.

Can the Rexa Pro be used for MTL vaping?

Yes. With an appropriate coil and a more restricted airflow setting, the device can be configured for an MTL-style draw.

Can the Rexa Pro be used for RDL vaping?

Yes. With a suitable lower-resistance coil and a more open airflow configuration, the device can be configured for an RDL-style draw.

What coil technology does the Rexa Pro support?

The Rexa platform is compatible with coil configurations using Duomax parallel mesh technology, depending on the specific Rexa coil.

Are 0.6Ω and 0.8Ω coils compatible with the Rexa Pro?

Compatible Rexa coil options can include 0.6Ω and 0.8Ω configurations. Always confirm compatibility and recommended wattage for the specific coil before installation.

Does the Rexa Pro have a touchscreen?

Yes. The device features a 2.51-inch HD touchscreen for navigating supported controls and settings.

How do you turn the Rexa Pro on or off?

According to the supplied operating information, press the main button five times to turn the device on or off.

How do you access wattage adjustment?

The supplied instructions indicate that pressing the main button three times enters wattage adjustment mode.

What colours is the FreeMax Rexa Pro available in?

The supplied colour options are Black, Green, Gunmetal, Gold, Pink, and White. Availability can vary depending on the market and stock.

How should the Rexa Pro be stored?

Store the device in a cool, dry location away from direct sunlight, excessive heat, moisture, children, and pets. For extended storage, switch the device off and remove the pod where appropriate.

What should I do if the device becomes unusually hot?

Stop using the device and disconnect it from any charging source if safe to do so. Allow it to cool in a safe location and do not continue using a device that shows signs of battery or electronic damage.